This standard specifies the specifications for vibration (velocity) of deep groove ball bearings (hereinafter referred as bearings) of which the appearance dimensions comply with provisions of GB/T 276-1994; diameter series are 0, 2 and 3; nominal inner diameter is 3 mm ~ 120 mm; radial clearances comply with Group 0, 2 and 3 clearances as specified in GB/T 4604-2006. And it specifies the vibration (velocity) peak-value specifications corresponding to Group V3 and V4, and the inner diameter is 3 mm ~ 60 mm.A.2.2 Axial load on bearing Axial load shall be applied on bearing; the provisions on set values are listed in Table A.1. Table A.1 Set values of axial load on bearing Bearing Outer Diameter D Set Value of Axial Load Exceeding To min. max.
|Title||:||JB/T 10187-2011: Translated English PDF of Chinese Standard JB/T10187-2011|
|Publisher||:||www.ChineseStandard.net - 2015-02-27|